Throttle Body For N1issan Titan 5.6L 2004-2015 Nis1san Pathfinder 4.0L 2005-2012 N1issan Frontier 4.0L 2005-2017 Armada

1pc Throttle Body For N1issan Titan 5.6L 2004-2015 N1issan Pathfinder 4.0L 2005-2012 N1issan Frontier 4.0L 2005-2017 N1issan Armada 5.6L 2005-2015 ‎161197S001

Specifications

Length(cm): 20, width(cm): 18, height(cm): 12

Weight(kg): 1.1

Material: Aluminum Alloy

Color: Silver

Placement on Vehicle: Engine

Condition: New

Fitment Type: Direct Replacement

Bore Diameter: φ70

Mount Hole Quantity: 4.0

Air Intake Port Maximum Diameter: φ82.2

Terminal Type: 6.0

Interchange Part Numbers

‎154-0219

154-0218

‎161197S001

161197S00C

16119-7S00E

161197S00F

161197S00D

161197S000

16119-7S00F

16119-7S00D

16119-7S000

161197S00A

161197S00E

16119-7S001

16119-7S00A

16119-7S00C

TB1155

S20181

977-323

6E-0012

TBN-001

TBN-004

Fitment

[For 4.0L] 2005-2015 Ni1san Xterra [For 4.0L] 2005-2019 N1isan Frontier [For 4.0L] 2005-2012 Ni1san Pathfinder

[For 4.0L] 2012-2021 Ni1san NV1500 [For 4.0L] 2012-2021 Ni1san NV2500 [For 4.0L] 2012-2021 Ni1san NV3500

[For 4.0L] 2009-2012 Suzuki Equator

Compatible With V8-5.6L VK56DE Eng. ============== [For 5.6L] 2004-2010 INFINTI QX56

[For 5.6L] 2012-2017 N1isan NV2500 [For 5.6L] 2012-2017 Nisan NV3500

[For 5.6L] 2005-2015 N1isan Armada [For 5.6L] 2008-2012 Nisan Pathfinder

[For 5.6L] 2004 N1isan Pathfinder Armada

Features

Built to strict quality control standards 100% factory tested

Easy Installation，100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards

Mechanically tested prior to leaving the factory ensures optimal performance and enhanced durability.

Perfect match fPerfect match for the original car.or the original car.

Regulate the flow of air into the engine, which is crucial to the fuel and air mixture for the engine.

Aluminum body valves meet very stringent vibration and temperture requirements.

Accurate manifold flow control designed to achieve high flowrates with minimum system effect.

Achieves low leak rates for smooth engine shutdown, and minimized noise, vibration and harshness

Accurate and repeatable flow control provides suitability for NOx absorber function.

Attention

When you need to replace the throttle body: 1. Check engine light and/or reduced power warning light is on. If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction. 2. Wrong idle speed. 3. Poor transmission shifting. 1. Do not disconnect any electrical connectors to the electronic throttle body assembly with the ignition switch in the “ON” position. Make sure the ignition key is in the off position first. 2. Additional components may need to be removed before proceeding with the electronic throttle body removal. 3. Some electronic throttle body assemblies have coolant hose attachments that must be removed during replacement. To prevent coolant loss, plug hoses upon removal. 4. After the replacement of the electronic throttle body, the idle speed may be Different or Vary. A Relearn procedure may be required on the vehicle. Refer to the appropriate technical service repair manual and follow “Relearn” instructions. Steps: 1. Remove the engine cover , if necessary. 2. Important:Remove the negative battery cable. 3. Remove the air intake hose. (There may also be some water cables attached to the throttle body. If this is the case remove the hose clamps using pliers before you remove the hoses. ) 4. Remove the electrical connections. 5. Remove the water hose. (If your throttle body does not have connected the water hose, you can skip this step. ) 6. Remove the mounting hardware and old electronic throttle body 7. Remove the old gasket 8. Clean the mounting surface 9. Install the new gasket 10. Install the new electronic throttle body 11. Torque the bolts to spec 12. Reattach the water hose 13. Reattach the electrical connections 14. Reattach the air intake hose 15. Important: Reattach the battery cable 16. If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool. 17. Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights. Q: How to tell if you need a new throttle body? A: If you find that your car idles quicker than usual, that may mean that the throttle body is sticking open. If your check engine light comes on and you find that you can’t get the car to accelerate above a certain rpm, the ECU has put you in limp mode. This means that there is something wrong with the drive-by-wire system. The most dangerous indicator is if the throttle sticks while driving and you can’t get the car to stop accelerating. If that ever happens, put the car in neutral and turn the key back one click and coast to the side of the road. Q: HOW TO PREVENT THE THROTTLE BODY FROM GETTING DIRTY? A: 1. Use only high-quality fuel. Otherwise, impurities and contaminants will get inside the engine causing the rapid formation of carbon deposits on the throttle body. For the same reason, you shouldn’t neglect the fuel filter replacement. It is recommended to flush the fuel tank from time to time. 2. Replace the air filter on time. Always make sure that the intake system is air-tight. This simple check prevents unfiltered air from being sucked into the intake system in places where its components are not connected tightly. 3. Always make sure that the crankcase ventilation system is fault-free. Its malfunctions cause a fast formation of oily deposits on elements of the throttle body.

Note

Here is the throttle body relearn procedure: 1. Start the engine and let it idle in park for 3 minutes. During that period the idle may be higher idle than normal. 2. After 3 minutes, turn the engine off and leave it off for 60- seconds. 3. Start the engine again and let it idle in park for 3 minutes one more time. During these run periods you may see a check engine light. Scan for codes and if you get throttle body related codes, clear them. 4. If the idle speed is still off, drive the vehicle at speeds above 44-mph and operate several acceleration and deceleration cycles. Then repeat step #3 one last time. Some tips for locating the throttle body under the hood in the Engine Compartment: • Throttle body is situated between the air cleaner and intake manifold • Throttle body is made from aluminum • In some older models, the throttle body is connected to the gas pedal by metal wire so you can identify it by pressing the gas pedal while the engine is shut off and see the moving part. • Once you find the throttle body, you have to be careful when dealing with it. This is because there are tubes and hoses and, in some cases, electrical connections attached to it. Is it safe to drive with a throttle body problem

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter. Why would a throttle body go bad

One of the main causes of a malfunctioning throttle body is internal contamination. ... This causes 'false air' to be sucked in, so that the total amount of air sucked in does not correspond to the position of the throttle valve. An incorrectly adjusted throttle position sensor can also cause an engine to run badly. Does throttle body need to be replaced

The throttle body plays a large role in controlling the fuel and air mixture in your engine. The proper mixture needs to be achieved in order for your engine to run smoothly and properly. Once this part fails, it needs replacing rather than repairing. What happens if you don't replace a throttle body

When a throttle body is not functioning correctly, you5ll usually notice a distinctly poor or very low idle. If the problem is really severe, you might even begin stalling when coming to a stop or when the throttle is quickly pressed. Q: Is there anything that has to be done after installing the replacement throttle body

A: A relearn calibration procedure is necessary after installation of replacement throttle body Q: What is throttle body relearn

A: Idle Relearn (aka throttle body relearn) is the procedure that is required to obtain the correct idle speed after replacing electronic throttle body, disconnecting a battery cable, clearing a check engine light, etc.