Reversing camera, 4 reversing sensors, monitor, control unit, buzzer (buzzer) - set
1. Reversing, parking, day/night Mini IP68 140 camera
The device connects to any monitor with a video input. The camera turns on automatically when reverse gear is engaged. The image from the camera is displayed in color. Generates auxiliary parking lines on the screen. Bumper mount camera.
The most important features
Actual viewing angle - 140 degrees
Vertical adjustment of the angle of inclination up to 90 degrees
Displays parking guidelines on the screen.
Waterproof grade: IP68
Universal mounting (2 holes) 2 mounting screws included
Camera technical specifications:
video format: PAL/NTSC
Resolution: 628 x 586 (PILE) / 510 x 496 (NTSC)
video output: RCA connector 1.0vp-p 75ohm
Image in color: Yes
Day/night image 8 LEDs for illumination at night
Displaying guide lines: Yes
Viewing angle: 170°
operating temperatures: -20°C to +70°C
Waterproof grade: IP68
Power: 12V
Camera dimensions: 22mm x 22mm x 23mm
Handle dimensions: 40mm x 20mm
2. 4 reverse sensors, control unit, buzzer (buzzer) - set
Universal 25mm ultrasonic sensors, set of 4 parking sensors with control panel and buzzer (buzzer), which emits a sound signal that increases in frequency as the distance from the obstacle decreases. The pika gets faster the closer the car is to the obstacle. The sensors are black, but they can be painted in any color. The sensors are activated automatically when you put the reverse gear on. They support the parking process. The principle of operation is based on ultrasonic waves which, after being reflected from an obstacle, return to the sensor. The distance from the obstacle is signaled by a sound that is emitted at smaller intervals the closer the car is to the obstacle.
Installation in the front and rear bumpers.
Technical Specifications:
Power: 12V (10.5V-16V)
Power consumption: <4W
Power supply current: 40-300mA
Device operating temperature: from -40°C to +80°C
Display operating temperature: from -20°C to +60°C
Ultrasonic frequency of sensors: 40KHz
Sensor diameter: 25mm
Diameter of the hole for sensors 22mm
Sensor cable length: 2.25m
Length of cable to buzzer: 2.4m
Cable length for connecting the display: 2.2m (no display included)
Length of the power cord: 80cm
3. Universal 4.3" color monitor, two inputs
Monitor - LCD display cooperating with reversing cameras. It has two independent inputs, one of which can display images from one camera or another source (DVDs), and after engaging reverse gear, it automatically switches to the second image source - e.g. a reversing camera.
Specification:
Matrix: 4.3" color
picture: 4:3, 16:9
contrast: 400:1
170 degree viewing angle
resolution: 480x272
Matrix: Color TFT LCD
dimensions: 80 x 128 [mm]
display dimensions: 96 x 54 [mm]
Power: 12V (10-15V)
Working temperature: -40 to 85 degrees C
Monitor turns on automatically when reverse gear is engaged
Supports systems: PILE (Europe) and NTSC (USA)
Two independent entrances: AV1 and AV2
The set includes:
LCD display
power cable: 90cm
connection instructions
4 black ultrasonic sensors (possibility of varnishing - a maximum of two thin layers is recommended)
Buzzer - buzzer - sounder
Central - the main module to which we connect sensors, buzzer and power supply.
Sensor hole saw - 22 mm
Self-adhesive double-sided tape (to the buzzer, monitor and control panel)
Reversing camera with 0.5m cable
Video cable with signal wire 6m
Power cord 1m
Hole saw to drill a suitable hole for the camera
connection instructions
Certificates: CE
This product cannot be officially used in road traffic and is intended for off-road use only!
New product - factory packed.
