Fine Rechargeable LED Sensor Light with Color Switching and Motion Easy Installation Plate Included x 4 x Dimming, Indoor, Closet, Sensor, USB,

[Size (approx.)] 30 x 4 x 1.5 cm [Weight (approx.)] 100 g [Color] Silver [Accessories] Charging USB cable (Type-C length approx. 19 cm), installation plate (with double-sided tape) x 2, instruction manual, warranty card (6 months from purchase) [Materials] Body: ABS resin, aluminum alloy, installation plate: steel (nickel plated), polyurethane [Specifications] Built-in rechargeable battery: lithium-ion battery 5V/400mAh, light source: COB Built-in 6 LEDs, Color temperature: Daylight = 6000K, Warm white = 4000K, Incandescent = 3000K, Brightness: Minimum 120 to maximum 150lm, Usage time: Constant lighting (upper and lower lights on simultaneously + constant lighting) = Minimum approx. 12 hours, maximum approx. 4 hours, Sensor mode (upper and lower lights on simultaneously): Minimum approx. 7 months, maximum approx. 2 months *When lit 10 times a day (varies depending on usage environment), Charging time: 1.5 hours *When the light is off, when using a standard 0.5A or higher/5V charger, Charging life approx. 500 times [Country of manufacture] China [Convenient light with motion sensor and adjustment function] A rechargeable LED sensor light with three light levels and dimming function. It can be used as a constant light or for different occasions. For example, indirect lighting. [Eco-friendly, no battery replacement required, easy installation without tools] Rechargeable and can be easily charged in a short time via USB (full charge: about 1.5 hours), cordless so you can install it anywhere. The main unit has a magnet so it can be easily installed on metal parts. In addition to metal parts, you can also install it in various places by using the included installation plate. [Long life on a single charge] Continuous lighting time: Maximum: Approx. 4 hours, Minimum: Approx. 12 hours, Automatically turns off in 20 seconds when motion sensor is activated. Eco-friendly LED light that requires fewer charges and is easy to use. [How to use and precautions] ① Power button ・ 1 time: Always on mode ・ 2 times: Sensor mode (night) ・ 3 times: Sensor mode (day) ・ 4 times: Power OFF ② Dimmer button (adjustment in always on mode) ・ Light color: Three colors, warm white, daylight, warm white ・ Long press: Brightness adjustable ※ USB charger is not included. Also, please use the included USB charging cable when charging. ※ When using in places where magnets stick, such as iron or steel, it can be installed in places with a width of about 20 cm or more. Before installation, wipe off any oil or dirt that has adhered to it, and check whether it will fall off or slide off when attached. If used in places where magnets do not stick, it cannot be attached to uneven surfaces or places with large distortions.