Multifunction 1 Channel DC 12V Delay Relay Controller LED Timer Switch Module Board PLC

Description: This multifunction relay control module adopted military grade doublesided PCB board, durable for using. There are 18 kind of functions you can choose. All the setting options can be saved automatically, your can no longer worry about losing the data. Features: Reversed polarity protection makes the module not damaged by the wrong connection of power supply. Automatic power saving function, the module will not consume much power. Lower level trigger relay, widely application for power control. High voltage resistance module has the stable performance for using. All the setting options can be saved automatically, not easy to lose the content. Specifications: Operation current: <70mA(12V), <40mA(static), <12mA(close) Operation voltage: DC 12V Operation temperature: 20 celsius ~60 celsius Max. load ability: DC 030V10A, AC 0250V10A(normally open end) DC 028V10A, AC 0125V10A(normally close end) Size: Approx. 7.6 x 4cm 2.9 x 1.5inch Weight: 31g Note: Please contact us for instruction. Function 1: Timing Pullin: after power on, when arrived the setting time T 1, the relay pullin, and the T 1 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal, repeat the above function. Function 2: Timing Disconnect: after power on the relay pullin, when arrived the setting time T 1, the relay disconnect, and the T 1 can be adjustable between 0.1 second 270 hours,

give IN1 interface a low pulse signal, repeat the above function. Function 3: Timing Pullin Then Disconnect: after power on, the relay do not pullin, when arrived the setting time T 1 relay pullin; when arrived the setting time T 2 relay disconnect, and the T 1 and T 2 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal, repeat the above function. Function 4: Timing Disconnect Then Pullin: after power on, the relay immediately pullin, when arrived the setting time T 1 relay disconnect; when arrived the setting time T 2 relay pullin, and the T1 and T 2 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal, repeat the above function. Function 5: Unlimited Cycle Timing Mode A: after power on, the relay don"t pullin, when arrived the setting time T1 relay pullin; when arrived the setting time T 2 relay disconnect, then repeat the above status, and the T1 and T 2 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal, repeat the above function. Function 6: Unlimited Cycle Timing Mode B: after power on, the relay immediately pullin, when arrived the setting time T1 relay disconnect; when arrived the setting time T 2 relay pullin, then repeat the above status, and the T1 and T 2 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal, repeat the above function. Function 7: Limited Cycle Timing Mode A: after power on, the relay do not pullin, when arrived the setting time T1 relay pullin; when arrived the setting time T 2 relay disconnect, then repeat the above status "NX" times, the T1 and T 2 can be adjustable between 0.1 second 9999 seconds, the cycle times "NX" can be adjustable between 19999, give IN1 interface a low pulse signal, repeat the above function. Function 8: Limited Cycle Timing Mode B: after power on, the relay immediately pullin, when arrived the setting time T1 relay disconnect; when arrived the setting time T 2 relay pullin, then repeat the above status "NX" times, the T1 and T 2 can be adjustable between 0.1 second 9999 seconds, the cycle times "NX" can be adjustable between 19999, give IN1 interface a low pulse signal, repeat the above function. Function 9: Selflocking Mode: give IN1 interface a low pulse signal, the relay pullin, again give a low pulse signal, the relay disconnect. Function 10: Trigger Mode: contain delay off function, the relay does not operate after power on, give IN1 interface a low pulse signal, the relay pullin immediately, when the IN1 pulse signal disappeared, the relay still pullin, when arrived the setting time T1 relay disconnect, the T1 can be adjustable between 0 second270 hours. Remark: in this function, if T1 is 0 second, give IN1 connector a low pulse signal, the relay pullin, when the low pulse signal disappeared, the relay immediately disconnect. Function 11: Trigger timing pullin: the relay does not operate after power on, give IN1 connector a low pulse signal, when arrived the setting time T1, the relay pullin ,T1 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal again, repeat the above function one time. Function 12: Trigger timing disconnect: the relay does not operate after power on, give IN1 interface a low pulse signal, the relay pullin, when arrived the timing time T1, the relay disconnect, T1 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal again, repeat the above function one time. Function 13: Trigger timing pullin and then disconnect: the relay does not operate after power on, give IN1 interface a low pulse signal, when arrived the timing time T1, the relay pullin, when arrived the timing time T 2, the relay disconnect, timing time T1 and T 2 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal again, repeat the above function one time. Function 14: Trigger timing disconnect and then pullin: the relay does not operate after power on, give IN1 interface a low pulse signal, the relay pullin immediately, when arrived the setting time T1, the relay disconnect, when arrived the timing time T 2, the relay pullin, timing time T1 and T 2 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal again, repeat the above function. Function 15: Unlimited Cycle Timing Mode A: the relay does not operate after power on, give IN1 connector a low pulse signal, when arrived the timing time T1, the relay pullin, when arrived the timing time T 2, the relay disconnect, then repeat the above status, T1 and T 2 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal again, repeat the above function. Function 16: Unlimited Cycle Timing Mode B: the relay does not operate after power on, give IN1 interface a low pulse signal, the relay pullin immediately, when arrived the timing time T1, the relay disconnect, when arrived the timing time T 2, the relay pullin, then repeat the above status, T1 and T 2 can be adjustable between 0.1 second 270 hours, give IN1 interface a low pulse signal again, repeat the above function. Function 17: Limited Cycle Timing Mode A: the relay does not operate after power on, give IN1 interface a low pulse signal, when arrived the timing time T1, the relay pullin, when arrived the timing time T 2, the relay disconnect, then repeat the above status "NX" times, the T1 and T 2 can be adjustable between 0.1 second 9999 seconds, the cycle times "NX" can be adjustable between 19999, give IN1 interface a low pulse signal again, repeat the above function. Function 18: Limited Cycle Timing Mode B: the relay does not operate after power on, give IN1 interface a low pulse signal, the relay pullin immediately, when arrived the timing time T1, the relay disconnect, when arrived the timing time T 2, the relay pullin, then repeat the above status "NX" times, the T1 and T 2 can be adjustable between 0.1 second 9999 seconds, the cycle times "NX" can be adjustable between 19999, give IN1 interface a low pulse signal again, repeat the above function. Package Included: 1 x Time Delay Relay Reversed polarity protection makes the module not damaged by the wrong connection of power supply. Automatic power saving function, the module will not consume much power. Lower level trigger relay, widely application for power control. High voltage resistance module has the stable performance for using. All the setting options can be saved automatically, not easy to lose the content.