SANEI Shower Head Water Saving Shamosy with Low Water Pressure Shower Board Blue PS3963-80XA-CB6

It is ultra-thin and lighter than previous models, and the head part acts as a grip to prevent accidental dropping. It has a water saving effect of approximately 30%. If you are using it in a home with low water pressure, you can replace it with the built-in low water pressure shower board to increase the power of the water. - SANEI - TOTO - Other than LIXIL (INAX) balance pot - KAKUDAI - TBC - YUKO - Some products of Mizutani, Noritz, Osaka Gas - Some products of MYM - KVK - MYM (thick hose) - Gaster (Tokyo Gas) - LIXIL (INAX) balance pot - Some products of Rinnai - Some products of Rinnai・Some products from Mizudani, Noritz, and Osaka Gas (if they cannot be installed as is) ●Manufacturer: Sanei Faucet Manufacturing Co., Ltd. ●Model number: PS3963-80XA-CB6 ●Product name: Water-saving shower head ●Series name: shamozy ●Shower supplies ●For bathroom ●Material: Shower head/ABS resin, adapter/polyacetal ●Color: Skeleton blue ●Accessories: Low water pressure shower plate, shower head adapter set 3 (T250-3, T250-7, T250-8 types) 《Water pressure conditions》 ●Water supply/hot water supply pressure (MPa): ・Minimum required water pressure/0.05 (flow pressure) ・Maximum water pressure/0.75 (hydrostatic pressure) [Note] *The maximum operating temperature of the shower head is 60℃. *Regular inspections and parts replacement are required to maintain faucet performance. As a guideline, worn out parts should be replaced every 5 years, and check valves should be inspected and replaced every 3 to 5 years for safety reasons. *If the water/hot water supply pressure exceeds 0.75MPa, reduce the pressure to around 0.2~0.3MPa using a commercially available pressure reducing valve. *Make sure the water supply pressure is higher than or equal to the hot water pressure. *Make sure the water supply/hot water supply pressure is 0.05MPa or higher.