Name: Microcomputer digital thermostat
Model: XH-W2102
Measuring input: NTC 10K 395OK
Input voltage: 100-240V
Temperature measurement range: -50~110°℃
Temperature control range: -19~99°℃
Output capacity: 10A-15A
Maximum power: 2200W
Size: 137*98*45mm
Setting :
Press SET once to switch :temperature control, F-1, F-2, F-3, four modes
1, the start value is set to the left of the temperature control mode, and the stop value is set to the right.
2, F-1 is the intermittent working mode, set the start time on the left and set the stop time on the right.
3, F-2 is the timed shutdown mode, the hour is set to the left, the minute is set to the right, and the time is automatically shut down.
4, F-2 is the regular power-on mode, set the hour on the left, set the minute on the right, and automatically start the arrival time.
Note: 4 functions cannot be performed at the same time.
Package:
1*2200W Digital Thermostat Microcomputer Intelligent Socket Switch
more details can feel free to contact us, Thanks ^^
Q: Where is this thermostat used?
Answer: It can be used as long as the temperature needs to be controlled within 100 degrees. For example, control the water pipe temperature to exceed 60 degrees after the floor heater is started to start the circulating pump, for example, control the electric heating heater to exceed 50 degrees and cut off the power, such as controlling the fish tank heating rod The water temperature should not be greater than 32 degrees. For example, control the temperature of the heating box to 36 degrees for hatching eggs. For example, control the temperature of the chicken farm to be higher than 35 degrees and start the exhaust fan. For example, control the chassis radiator when the temperature is greater than 40 degrees. Above 30 degrees and so on... it can be started at high temperature (heat dissipation module) or started at low temperature (heating mode)
Q: What is the difference between 150OW and 2200W?
Answer: 1500W and 220OW here refer to the maximum supported power. The 1500W adopts the national standard 0.5 square pure copper sheathed wire, and the contact is a 10A relay, which supports long-term work under 1500W. The 2200W adopts the national standard 0.75 square pure copper sheathed wire, and the contact is a 15A relay, which supports long-term work with loads below 2200W. We recommend buying 2200W, which is not too expensive, but it is more assured to use!
